134A
SAVE THESE INSTRUCTIONS
(134) MODEL CS8221/CS8231 SALTWATER SYSTEM & FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/18/2011
English
Page 10
PPRROODDUUCCTT IINNFFOORRMMAATTIIOONN//SSPPEECCSS
T
his product is specially designed for above ground pools. It will destroy the
bacteria, oxidize bather organics and control algae, which provide you a safe, clean
and comfortable swimming pool.
C
ommon salt (sodium chloride) is made up of two elements, sodium and chlorine.
During the installation of your Saltwater System/Filter Pump, a measured quantity
of salt is dissolved in the pool water to make it slightly salty. The pool water flows
through the saltwater system’s electrolytic cell to produce HCLO. The HCLO
dissolves in the water and instantly starts destroying bacteria and algae. It
also oxidizes all other organic materials.
Low voltage direct current is applied to the copper electrode, and copper ions are
generated and dissolved instantly in the water. Copper is an effective algaecide,
which will prevent algae from growing in the pool.
HOW THE CHLORINE IS GENERATED
Wattage: 400W
Ideal Salt Level: 3000 ppm (parts per million)
Maximum Chlorine Output/hour: 12 grams/hour
Copper Ionizer Output Current: 175 mA
Limited Warranty: see “Limited Warranty”
HOW COPPER IONS ARE GENERATED
PRODUCT SPECIFICATIONS
Flow Sensor
Electronic
Control Station
Electrolytic Cell
Water Outlet
To Next Page
Loading...
Need help?
General
