EasyManuals Logo
Home>Intex>Swimming Pool>PureSpa SC-10

Intex PureSpa SC-10 User Manual

Intex PureSpa SC-10
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
344
PO
S AVE THESE INSTRUCTIONS
(344PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 07/20/2019
English
Page 28
MAINTENANCE (continued)
STORAGE
Spa Tub and Cover Air Bladder Repair
Use the enclosed repair patch to repair any puncture:
Clean and dry the area to be repaired thoroughly.
Remove the patch backing paper and press patch rmly over the puncture.
Smooth out the surface to remove any air bubbles under the patch.
In regions subject to freezing temperatures, drain, clean, disassemble and properly store the spa set and related
components indoors when the temperature drops below 39°F (4°C).
1.
Drain and clean the spa following the “Spa Tub Drainage” and “Spa Tub Cleaning” sections.
2.
Reverse set up instructions to de ate and disassemble the spa tub, spa control unit and spa cover air
bladder.
3.
To de ate the tub and the cover air bladder:
a) Open the de ation outlet cap
(34)
with the included bolt
wrench
(6) (see drawing 17)
.
b) Insert de ation hose adaptor
(35)
into the de ation outlet.
c) Insert in ation hose
(7)
over the de ation hose adaptor
(35)
.
d) Insert the other end of the in ation hose into the tub air valve
or cover air bladder valve.
e) Press the air bubble button to de ate.
f) When de ation is completed reverse above steps and
ensures the de ation outlet cap
(34)
is securely fastened.
Caution:
Only use for the purpose described in this manual.
Keep the in ation hose away from water or small objects when
the de ation function is activated to avoid damage to the blower
motor.
4.
Make sure all the spa components and accessories are
thoroughly clean and dry before storage. Air-dry the spa tub in
the sun for an hour before folding.
5.
Fold the spa tub loosely and avoid any sharp corners to prevent
damage or leakage to the spa tub liner.
6.
Prepare additional new cartridges for next time use.
7.
Store the spa tub and accessories indoors, in a dry, temperature controlled, between 32º – 104ºF
(0º – 40ºC), storage location.
8.
The original packing can be used for storage.
17
6
7
35
1
34
2
3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intex PureSpa SC-10 and is the answer not in the manual?

Intex PureSpa SC-10 Specifications

General IconGeneral
BrandIntex
ModelPureSpa SC-10
CategorySwimming Pool
LanguageEnglish

Related product manuals