Intex PureSpa SSP-H-20-1C User Manual

295
A
S AVE THESE INSTRUCTIONS
(295IO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/10/2018
English
Page 6
CAUTION
• In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must
not be supplied through an external switching device, such as a timer, or connected to a circuit
that is regularly switched on and off by the utility.
• Maintain water chemistry in accordance with manufacturer’s instructions.
• This product is provided with a RCD located at the end of the power cord. The RCD must be
tested before each use. Do not use the spa if the RCD does not function properly. Disconnect
 thepowercorduntilthefaulthasbeenidentiedandcorrected.Contactaqualiedelectricianto
correct the fault. Do not bypass the RCD. There are no serviceable parts inside the RCD.
Opening the RCD will void the warranty.
WARNING

TEST
RESET
RESET
TEST
TEST
RESET
RESET
RESET
TEST
TEST
WARNING
• Barriers, covers, alarms, or similar safety devices are helpful aids, but they are not substitutes for
continuous and competent adult supervision.
Safety equipment
• Keep a working phone and a list of emergency phone numbers near the spa.
Safe use of the spa
• Encourage all users especially children to learn how to swim.
• Learn Basic Life Support (Cardiopulmonary Resuscitation - CPR) and refresh this knowledge
regularly. This can make a life-saving difference in the event of an emergency.
• Instruct all spa users, including children, what to do in case of an emergency.
• Never dive into any shallow body of water. This can lead to serious injury or death.
• Do not use the spa when using alcohol or medication that may impair your ability to safely use the
spa.
• When covers are used, remove them completely from the water surface before entering the spa.
• Protect spa occupants from water related illnesses by advising them to keep water treated and
practicing good hygiene. Consult the water treatment guidelines in the user’s manual.
• Store chemicals out of the reach of children.
• Attached the safety signage provided on the spa or within 2 m of the spa in a prominent visible
position.
1.
Plug the unit into a grounded electrical outlet.
2.
Press the
RESET
button on the RCD.
3.
Turn on the spa electrical equipment.
4.
Press the
TEST
button on the RCD. The RCD indicator should
turn off and the electrical equipment should shut off. If the RCD
indicator does not turn off, and the electrical equipment does not
 shutoff,theRCDisfaulty.Donotusethespa.Contactaqualied
electrician to correct the fault.
5.
Press the
RESET
button on the RCD. The indicator on the RCD
should turn on. If the RCD indicator does not turn on, the RCD is
 faulty.Donotusethespa.Contactaqualiedelectrician
immediately to correct the fault.

Intex PureSpa SSP-H-20-1C Specifications

General

Brand	Intex
Model	PureSpa SSP-H-20-1C
Category	Hot Tub
Language	English