4 iRobot Roomba 500 Series
Important Tips
Roomba contains electronic parts. DO NOT submerge Roomba or spray it
with water. Clean with a dry cloth only.
Before using Roomba the first
time, you need to activate Roomba
by removing the battery pull tab.
Charge Roomba overnight before
first time use.
Remove battery pull tab
For Best Performance
Remove and clean Roombas brushes after every use.
Empty Roombas bin and clean its lter after every use.
Use a Virtual Wall
®
(optional accessory) to keep Roomba cleaning where
you want it.
Use your Roomba frequently.
Battery Life
To extend Roomba’s battery life and keep Roomba cleaning at peak
performance:
Always keep Roomba plugged in when not in use.
Recharge Roomba as soon as possible. Waiting several days to
recharge Roomba can damage the battery.
For storage off the power supply, remove the battery from Roomba and
store in a cool, dry place.
Blue or black batteries should be stored after Roomba has been
used.
Yellow batteries should be stored after being fully charged.
Turning Roomba on and off
To turn Roomba ON, press CLEAN once. You will hear a
beep and the CLEAN button will light.
To start a cleaning cycle, press CLEAN again. Roomba will
start a cleaning cycle.
To pause Roomba, press CLEAN while Roomba is cleaning.
To turn Roomba OFF, press and hold the CLEAN button
until Roomba’s lights turn OFF.
To resume the cleaning cycle, press CLEAN again.
To Next Page
Loading...
Need help?
General
