Inspection and Installation
Item Qty. Model Remarks
Ex-factory Test Report x1 - It contains the test report
and calibration report of
the instrument before
delivery.
Communication card
(optional)
X IT-E166/IT-
E167
IT-E166 (GPIB communi-
cation card) and IT-E167
(Analog/RS232 communi-
cation card) are non-
standard accessories.
The actual delivery quan-
tity is subject to the user's
order.
Upon verification of the shipment, keep the package and relevant contents
thereof in a safe place. When returning the instrument for warranty service or
repair, the specified packing requirements shall be met.
2.2 Instrument Size Introduction
The instrument should be installed at well-ventilated and rational-sized space.
Please select appropriate space for installation based on the instrument size.
The detailed dimension drawings of the IT6000C series are as follows (unit:
mm, deviation: ±1 mm):
Copyright © Itech Electronic Co., Ltd.
19
To Next Page
Loading...
Need help?
General
