Quick Start
Copyright © Itech Electronic Co., Ltd. 6
Chapter2 Quick Start
This chapter introduces the front panel, the rear panel, key functions and VFD
display function of the power supply, make sure that you can quickly know the
appearance, instruction and the key function before you operate the load, Help
you make better use of this series of power supply.
2.1 Brief Introduction
IT6800A/B series power supply is single output DC programmable power
supply, which support panel programming and offer OCP and OVP.
Furthermore, built-in RS232/USB communication interface is suitable for either
bench or rack mounted operation, which can provide multiple solutions
according to the requirements of your design and test. IT6860A/B series and
IT6870A/B series programming DC power supply offer the dual-range voltage
switch for your choice, which can replace two ordinary ones.
High-visibility vacuum fluorescent display (VFD)
Digital keypad operation
High accuracy and high resolution
Low ripple and low noise
Intelligent fan control, energy conservation, noise reduction
Can be monitored by computer software
Output voltage and current values accordance with procedure
Can use the knob to adjust the voltage and current
Can adjust the numbers steps using the cursor
Can set the output timer(0.1~9999.9S)
Standard RS232/USB communication interface
Rich SCPI orders and IT6820 compatible frame protocol to facilitate the
formation of intelligent test platform