ITech IT7600 Series User Manual

System Commands
Copyright© Itech Electronic Co., Ltd. 14
Returns
<value>
STATus:OPERation:NTRansition
This command set the value of the Operation NTR(Negative-Transition) register
Setting parameter can determine which bit value of operation event register is 1
and the bit will cause OPER of status byte register to be 1.
Command syntax
STATus:OPERation:NTRansition <value>
Arguments
<value> 0~65535
Example
STATus:OPERation:NTRansition 128
Query syntax
STATus:OPERation:NTRansition?
Returns
<value>
STATus:OPERation:CONDition?
This command can read the parameter from the operation condition register.
When the parameter of operation condition register changes, the bit
corresponding in operation event register is 1.
Command syntax
STATus:OPERation:CONDition?
Arguments
None
Returns
<value>
SYSTem:BEEPer:IMMediate
This command is used to test the beeper. After executing this command, the
instrument will beeper immediately.
Command syntax
SYSTem:BEEPer:IMMediate

ITech IT7600 Series Specifications

General

Brand	ITech
Model	IT7600 Series
Category	Power Supply
Language	English