ITech IT7600 Series User Manual

System Commands
Copyright© Itech Electronic Co., Ltd. 15
Arguments
None
Query syntax
None
SYSTem:BEEPer[:STATe]
This command is used to turn on/turn off the beeper, when the arguments is set
to 1/ON, the beeper is enabled and press keyboard will beeper, otherwise, it is
mute.
Command syntax
SYSTem:BEEPer < OFF|ON|0|1>
Arguments
<OFF|ON|0|1>
Example
SYSTem:BEEP 1
Query syntax
SYSTem:BEEPer:STATe?
Returns
<0|1>
SYSTem:VERSion?
This command is used to query the current SCPI version. The returned
parameter is a string like”YYYY.V”, in which the YYYY is the year of that
version, V is the software version of that year.
Command syntax
SYSTem:VERSion?
Arguments
None
Returns
<string>
SYSTem:ERRor?
This order is used to query the error information of the power supply. When the
error LED lights on the front panel, it tells us that there is one or more hardware

ITech IT7600 Series Specifications

General

Brand	ITech
Model	IT7600 Series
Category	Power Supply
Language	English