ITech IT8731 User Manual

Inspection and Installation
Copyright © Itech Electronic Co., Ltd. 1
Chapter1 Inspection and Installation
This chapter mainly explains to the user how to do the inspection after receiving
the package, and introduces the installation size and steps for the mainframe
and modules.
1.1 Verifying the Shipment
Unpack the box and check the contents before operating the instrument. If
wrong items have been delivered, if items are missing, or if there is a defect
with the appearance of the items, contact the dealer from which you purchased
the instrument immediately.
The package contents include:
Item
Qty
.
Model
Remarks
Electronic Load
x1
IT8700 series
The IT8700 series include:
IT8722/IT8723/IT8731/IT8732/IT8733/
IT8722B/IT8732B/IT8733B/IT8722P/I
T8723P/IT8731P/IT8732P/IT8733P/IT
8722BP/IT8732BP/IT8733BP/IT8702/I
T8703/IT8701P/IT8702P/IT8703P
Power cord
x1
IT-E171/IT-E172
/
IT-E173/IT-E174
User may select an appropriate power
cord that matches the specifications of
power socket used in the area. See
the Section Connecting the Power
Cord for details.
USB
x1
-
-
Ex-factory Test
Report
x1
-
It is the test report of the instrument
before delivery.
NOTE
Upon verification of the shipment, keep the package and relevant contents thereof in a
safe place. When returning the instrument for warranty service or repair, the specified
packing requirements shall be met.
1.2 Installation Size Introduction
The instrument should be installed at well-ventilated and rational-sized space.
Please select appropriate space for installation based on the electronic load
size.

ITech IT8731 Specifications

General

Brand	ITech
Model	IT8731
Category	Test Equipment
Language	English