Operations introduction
Copyright © Itech Electronic Co., Ltd. 50
Fig 4-10 VON LATCH load’s working range
⚫ When enable Von LATCH, voltage rise and is higher than the Von loading
voltage, input of electronic load is turned on. When the power supply’s
voltage fall and is lower than Von unload value, input won’t be turned off.
Fig 4-11 VON LATCH load’s working range
Von function panel operations
1. Power on the electronic load
2. Select a channel, such as channel 1
CH01 CC OFF
Vdc=0.0000V
Adc=0.0000A
To Next Page
Loading...
Need help?
General
