To Next Page

To Previous Page

ITL SERVICE MANUAL

B-43

Step 50

Fit Straight connection in the crankcase alongwith sealing washer

(18x24x1.5 cu)

Step 52

Fit Neck for screw on suction side of oil pump housing.

Using sealing ring (Cu)

Step 51

Fit the lubrication oil pump assy to Front Brg. Cap using bolt M10x130.

(Use 0.1mm shim to adjust Backlash if required.)Torque the bolt up to

3-4 kg m with torque wrench.

Step 53

Fit suction strainer to neck for screw and tight propnly

Questions and Answers:

Need help?

Do you have a question about the ITL SOLIS 75 and is the answer not in the manual?

ITL SOLIS 75 Specifications

General