To Next PageTo Next PageWhy are ITRON Measuring Instruments giving erroneous readings on light load tests?
Erroneous readings during light load tests on ITRON Measuring Instruments are often due to improper 'jogging'. To resolve this, sequence the test in order of applied power, ensuring the lowest power is tested first.
General| Device Type | Electricity Meter |
|---|---|
| Current Rating | 200 A |
| Display Type | LCD |
| Frequency | 60 Hz |
| Frequency Range | 50/60 Hz |
| Ingress Protection | IP54 |
| Type | Smart Meter |
| Voltage Rating | 120/240V AC |
| Battery Life | 10 years |
| Measurement Type | Active Energy |
Lists available personality modules and their functions.
Details meter base installation and verification of register operations.
Guides on upgrading meters by changing personality modules.
Explains the Hall Effect principle for power measurement in these meter versions.
Explains the ZRO-C2A device for resetting readings and tamper indicators.
Explains Normal, Alternate, and Test modes for these modules.
