Ivation IVADH70PW User Manual

Understanding the Control Panel
The control panel may differ slightly from the illustration below.
Lights and Displays
1 Reservoir Full Light
Indicates when water reservoir is full
2 Defrost Light
Indicates Defrost Mode activation when temperature is low.
3 Current Temp/Timer Display
Displays current temperature when unit is in operation. When “Timer” button is pressed to set operation time, this display
shows set time for ten (10) seconds before returning to current temperature display.
7 Set Humidity/Current Humidity Display
Displays current humidity when unit is in operation. To select preferred humidity, press or . Selections will display here in
increments of 5% with each press. Adjustable range is between 30% and 90% RH (relative humidity). Once humidity is set,
display will return to current humidity after ten (10) seconds.
Control Buttons
4 Power ON/OFF Button
Turns the unit ON or OFF manually.
5 Fan Speed Button
Choose HIGH ( ) or LOW ( ) fan speed (speed indicator lights above button)
6 Timer Button
Press to initiate the Auto start and Auto stop feature.
8 °C/°F Button
Press to switch between Celsius and Fahrenheit.
Components
1. Control Panel
2. Moist Air Intake
3. Air Filter
4. Drain Reservoir
5. Roll Casters
6. Handle
7. Dehumidified Dry Air Vent
8. Continuous Drainage Outlet
3
1
2
3
7 84 5
7
1
6
3
2
45
8
6

Ivation IVADH70PW Specifications

Power

voltage	115V
current consumption	7.5A

Operating Environment

operating temperature range	41°F~89.6°F
moisture removal	70 Pint (80°F/60%RH)
refrigerant	R-410A

Weight and Dimensions

dimensions	23.5” x 11.1” x 15.28”
weight	45.42 lbs.