Ivation IVADH70PW User Manual

Maintenance Guide
Make sure the unit is unplugged from wall unit before cleaning.
Cleaning the exterior
1. Wipe with clean soft cloth.
2. If unit is especially dirty, use mild detergent with a moist cloth.
3. Do NOT clean with hose or immerse in water as this may short circuit the unit causing it to malfunction.
Cleaning the air filter
The air filter is designed to filter dust and other materials from the air. When the air filter is clogged, the unit will use more
electricity to operate. For optimal efficiency, clean the air filter once every two (2) weeks.
1. Pull air filter out gently.
2. Clean with a vacuum cleaner or wash with clean water and dry with a soft cloth.
3. Carefully re-install air filter to the unit
Troubleshooting Guide
Unit does not start
• Make sure the dehumidifier’s plug is secured entirely into the outlet.
• Check your home fuse/circuit breaker box.
• Dehumidifier has reached its preset level or bucket is full.
• Water bucket is not in the proper position.
Dehumidifier does not dry the air as it should
• Allow enough time to remove the moisture.
• Make sure there are no curtains, blinds or furniture blocking the front or back of the dehumidifier.
• The humidity control may not be set low enough.
• Check that all doors, windows and other openings are securely closed.
• Room temperature is too low, below 41°F (5°C).
• There is a kerosene heater or something giving off water vapor in the room.
The unit makes a loud noise when operating
• The air filter is clogged.
• The unit is tilted instead of upright as it should be.
• The floor surface is not level.
Frost appears on the Coils
• This is normal. The dehumidifier has Auto defrost feature.
Water on floor
• Hose to connector or hose connection may be loose.
• Intend to use the bucket to collect water, but the rear drain plug is removed.
ES, AS, P2 and EC appear in the display
• These are error codes and protection code. See the CONTROL BUTTONS ON THE DEHUMIDIFIER section.
5

Ivation IVADH70PW Specifications

Power

voltage	115V
current consumption	7.5A

Operating Environment

operating temperature range	41°F~89.6°F
moisture removal	70 Pint (80°F/60%RH)
refrigerant	R-410A

Weight and Dimensions

dimensions	23.5” x 11.1” x 15.28”
weight	45.42 lbs.