When using RF input of TV, connect the ANT-OUT jack of 3300STB and the RF-IN jack
of the TV. Then use the TV remote to search channels. After finishing searching, you
can start watching TV. If the TV signal is not clear, you can switch between CH3 and
CH4 via key on the rear panel. Remember to re-search channels after switching it.
INTRODUCTION
This user manual is intended to guide you through the operation for the ATSC High
Definition Digital Terrestrial Receiver.
A password will be required when modifying advanced options in the Menu. The
default password is "000000".
MAIN FUNCTIONS AND FEATURES
This product is a high-performance HDTV Terrestrial Receiver. It fully complies with ATSC
receiver requirement specifications. It provides users with all digital terrestrial TV and radio
signals being broadcast in Standard Definition and High Definition.
• Convert Digital Broadcast to Your Analog TV
• EPG (Electronic Program Guide) and Program Information
• Favorite Channel List
• Parental Control Function
• Auto Tuning (Tune All Digital Broadcasts)
• Signal Quality Indicator
• Closed Captioning
• Advanced Video / Audio Parameters Adjustment
• With Learning Remote
• Analog Pass through Channel ¾
• LED Clock Display
• Cable QAM capable
• Recording of TV Program, Playback for Movies, Pictures, and Music
• Video Decoder: MPEG-2 MP at HL, MPEG-4 SP, ASP, H.264 HP at L4.1, 4.X, 6.X,
FLV Format and VC-1, MKV
• Video Resolution: 1080p,1080i, 720p, 576p
• Built in HDMI Output
Warning: You can only switch the TV program in the same channel spot during recording
/ burning process. If you want to switch to another TV program of different channel spot,
you must stop recording / burning first.
To Next Page
Loading...
Need help?
General
