J-200
10.2 Activate Jets Pump
The control panel JETS 1 button activates jets pump 1. The rst press
activates low speed, the second press activates high speed, and the third
press shuts jets pump 1 off. The JETS 2 button activates jets pump 2.
The rst press activates high speed, the second press turns jets pump 2
off. When manually activated, either pump will automatically turn off after
20 minutes.
10.3 Multi-Colored LED Light System Operation
The multi-colored LED light system offers seven constant color
variations and three unique random modes for enhanced spa
enjoyment. Press the Light button once to activate the rst light
mode, then continue pressing the button to select one of seven
constant colors or random solid color mode as illustrated below. To turn off
the light, after the last press of the button wait for more than 5 seconds
and then press the light button again. For the exterior lights, they are only
when the lights are activated. The exterior lights display a solid white
color only.
Note: Anytime the spa light is manually activated, it will remain on for 2
hours then automatically shut off.
Press Mode/Color Press Mode/Color
1st high speed blend mode 12th OFF
2nd OFF 13th solid Amber color
3rd low speed blend mode 14th OFF
4th OFF 15th solid Green color
5th freezes low speed blend
mode
16th OFF
6th OFF 17th solid Aqua color
7th solid Blue color 18th OFF
8th OFF 19th solid Near White color
9th solid Violet color 20th OFF
10th OFF 21st back to high speed
blend mode
11th solid Red color
10.4 Adjusting Individual Jet Flow
The water ow through certain jets in your spa can be adjusted or turned
off by rotating the outside jet ring. Other jets also offer an adjustable
center nozzle that allows you to change the water discharge angle (if
equipped). Simply tilt the center nozzle in these jets to the desired angle
to customize your personal massage.
Note: Always keep at least 6 adjustable jets open at all times to ensure
proper ltration characteristics within spa.
29
To Next Page
Loading...
Need help?
General
