Jacuzzi Lodge L Instructions For Preinstallation

21
Maximum absorption of the system (LODGE M, L, S)
(k): at 230 V - (j): absorbed power
(
): with 3 kW heater
(x): see Chapter. “Electrical preparations”
Q“BLOWER WITH HEATER/HEAT EXCHANGER” VERSION
Power supply (x)
Total consumption
(with heater)
Total consumption
(with heat exchanger)
Spa-Pak
(optional)
Volt
220-240 ~ 50/60 12(16

)
(k)
3,7
(k)
2,7(3,7

)
(j)
0,85
(j)
2,5
(k)
Hertz Ampere Ampere
kW kW
Ampere
0,5
(j)
kW
Q“HYDRO WITH HEATER/HEAT EXCHANGER” VERSION
Power supply (x)
Total consumption
(with heater)
Total consumption
(with heat exchanger)
Spa-Pak
(optional)
Volt
220-240 ~ 50/60 17 (21

)
(k)
8,8
(k)
3,85 (4,85

)
(j)
1,95
(j)
2,5
(k)
Hertz Ampere Ampere
kW kW
Ampere
0,5
(j)
kW
Q“HYDRO WITH HEATER” VERSION
FOR
JACUZZI® ECO-HEAT/COOL POWER HEAT PUMP
Power supply (x)
Total consumption
(with heater)
Spa-Pak
(optional)
Volt
220-240 ~ 50/60 16 (20,5

)
(k)
3,7 (4,7

)
(j)
2,5
(k)
Hertz Ampere
kW
Ampere
0,5
(j)
kW
Q“HYDRO+BLOWER WITH HEATER/HEAT EXCHANGER” VERSION
Power supply (x)
Total consumption
(with heater)
Total consumption
(with heat xchanger)
Spa-Pak
(optional)
Volt
220-240 ~ 50/60 20 (24

)
(k)
11
(k)
4,55 (5,55

)
(j)
2,6
(j)
2,5
(k)
Hertz Ampere Ampere
kW
kW
Ampere
0,5
(j)
kW
Q“HYDRO+BLOWER WITH HEATER” VERSION
FOR JACUZZI® ECO-HEAT/COOL POWER HEAT PUMP
Power supply (x)
Total consumption
(with heater)
Spa-pack
(optional)
Volt
220-240 ~ 50/60 19 (23

)
(k)
4,35 (5,35

)
(j)
2.5
(k)
Hertz Ampere
kW
Ampere
0.5
(j)
kW
QSUPPLEMENTARY HEATER (OPTIONAL)
Power supply (x)
Total consumption
Volt
220-240 ~ 50/60
26
(k)
6
(j)
Hertz Ampere
kW
QHEAT EXCHANGER
- Primary inlet MAX temperature ....................................................50 °C
- Connections .......................................................................................... 3/4”
- Primary circuit ow rate ........................................................... 38 l/min
- Primary pressure drop ....................................................... 0,271 M H
2
O
The electrical system that powers the hot tub must absolutely
be sized for maximum consumption (as indicated in the respec-
tive tables).
Weights
QLODGE M
Net weight
average volume
of use
water volume
MAX
Total max. weight
kg litres litres kg
~ 260 ~ 880 ~ 1100 ~ 1360
support
area
concentrated load
on support area
m
2
kg/ m
2
~ 3 ~ 453
QLODGE L
Net weight
average volume
of use
water volume
MAX
Total max. weight
kg litres litres kg
~ 348 ~ 1420 ~ 1820 ~ 2168
support
area
concentrated load
on support area
m
2
kg/ m
2
~ 3,95 ~ 550
QLODGE S
Net weight
average volume
of use
water volume
MAX
Total max. weight
kg litri litri kg
~ 245 ~ 750 ~ 950 ~ 1195
support
area
concentrated load
on support area
m
2
kg/ m
2
~ 2,45 ~ 488
User safety
Q If installed by qualied personnel in compliance with the in-
structions in the enclosed installation manual, the system does
not present any risks for the user. However, safety is also contin-
gent upon appropriate use, according to the provisions in the
respective manual, while the user must delegate the operations
described in the installation manual to qualied personnel.
Q It is important to make sure that personnel tasked to install
or manage the system are qualied as per legal requirements in
eect in the country where installation is carried out.
Q
This appliance uses and generates radio waves. If it is not installed
and used as
indicated, it can interfere with the reception of television and radio
programmes.
However, in special cases this may happen even if the instructions
provided are followed.

Jacuzzi Lodge L Specifications

General

Brand	Jacuzzi
Model	Lodge L
Category	Hot Tub
Language	English