Audio system (if available)
The audio system installed on the Skyline series consists of a
series of speakers (located under the grid of the overflow
channel, at the corners of the tub), a sub-woofer for optimal
reproduction of low frequencies (located in the tub compart-
ment) and a radio with an integrated CD player. The system
is designed with a high level of water resistance. An MP3
player (not included) can also be connected to it.
Radio
Turn the audio system on by pressing the key . The radio
will come on, and the display will show any memorized station,
its band and its frequency.
Press the key again to turn the system off.
If you have already inserted a CD, the player will instead by
activated. Press the key SRC until the display shows "radio"
mode.
Select the desired frequency band by pressing the key BAND.
The available bands are FM1, FM2, FM3, AM1, AM2. Band
WB is the weather band and is only available in areas covered
by this service.
Frequency adjustment
Press the keys or to scroll the frequency range up or
down, respectively.
Press and hold one of the two keys to start automatic scan-
ning. This will be interrupted as soon as you find a station with
a clear signal, or if you press the key again.
Memorization of desired frequency
You can memorize six stations for each frequency band.
To memorize the currently active frequency, press and hold one
of the keys from 1 to 6 for a few seconds. The message "CH"
will appear along with the number for the selected position.
To select a memorized station, press the corresponding key.
29
To Next Page
Loading...
Need help?
General