Simple Counting
1. Press to select the unit “PCS”.
2. Press to choose the sampling amount .Available options are “ = (10 pieces),
= (2 pieces), = (50 pieces), and = (100 pieces).
3. Put the corresponding samples on the weighing pan, then press .
“ ” is displayed momentarily before the display reverts to the sample size. Remove the
samples and put the load on, the scale begins to count.
NOTE:
◎ The larger the sample size, the more accurate unit weight.
◎ The sampling result is retained when the unit is turned on.
Setting mode
1. Press and hold while turning on the scale. Do not release till the
OFFSET value is displayed.
2. Press , the screen displays “ ”
3. Press to step through available settings
4. Press to initial the displayed setting, and then press to step through
internal parameters.
5. Press to save the setting, press to exit without saving.
6. Press key to save the settings and back to the weighing mode.
Description of Parameter Values
Set the activation mode of backlight. Options are Auto=Auto on with items
greater than 9d placed on the weighing pan, ON = Backlight on and OFF=Backlight off.
Set the period of inactivity before the scale automatically turns off. Options are
NO=non power-off, 5, 10 and 15(minutes).
OFFSET Value(not available to set )
To Next Page
Loading...
Need help?
General
