8
Ø When LCD display and follow by
press to choose the external device i.e. : PC、TP、SH、AX、
EZ2-S、TDP-643.
Ø The LCD display shows
– press key to enable (ON) or disable (OFF) the memory
function.
Ø The LCD display shows
– press key to select beep mode.
Un – beep sounds when load over pre-set value
In
– beep sounds when load between pre-set values
no – beep sounds when load over pre-set value 1 or under pre-set
value 2
Lo – beep sounds when load under pre-set value
Remarks:
Press key anytime when a function setting is completed.
This will save the setting and return the scale to normal weighing mode.
Recharge the battery:
When battery symbol appears on the LCD display, plug in AC power for
charging the battery, the indicator will turn red. The charge is complete, when
indicator turns into green, (It takes about 8 hours for charging).
.
M+
MR
M+
MR
ZERO
+
M+
MR
To Next Page
Loading...
Need help?
General
