EN 5
D – CALL HANDLING
If a call comes in while rocking out to your music,
quickly press the “play/pause” button once to pick it
up; quickly press again when you’re done to hang up.
While on a call, if you want to make it private, press
and hold the “play/pause” button for 2 seconds to
move the call from your speaker to your phone.
If a call comes in and you don’t want to pick it up,
press and hold the “play/pause” button for 2 seconds
to send the call to voicemail.
*See the tables on the following pages for complete
button function and LED light indicator interpretation.
PAIR 2 CLASSIC+ SPEAKERS
1. Turn on speaker 1 (press and hold the volume dial
for 4 seconds to turn on).
2. Pair your device to the speaker by following the
“CONNECTING TO A DEVICE” instructions.
3. Turn on speaker 2 (press and hold the volume
dial for 4 seconds). Do not pair speaker 2 to
yourdevice.
4. On speaker 1, press and hold the backward
and forward button at the same time for
2 seconds. You will hear “ready to pair” while the
speakers are connecting to each other. This will
take a few seconds.
5. Once the speakers are paired successfully
together, you will hear “left channel” and “right
channel” indicating that they are in stereo mode.
6. Press the “play/pause” button on either speaker
to listen to music. Press and hold the backward
and forward button at the same time
for 2 seconds to toggle between stereo and
monomodes.
7. Once paired, your speakers will recognize each
other every time both are turned on. To disconnect
pair 2 mode, press and hold the backward
and forward button at the same time for
2seconds. This will enter into pairing mode again.
Note: If either of your speakers has been previously
paired to a device, or will not pair automatically, press
and hold the “play/pause” and
buttons on both
speakers for 2 seconds to activate pairing mode. You
will know they have reached pairing mode by the red
and blue blinking light.
...2s
...2s
...1x
...1x
...4s
...2s
...4s
To Next Page
Loading...
Need help?
General
