4
Before connecting to the computer for the first time insert the CD-
ROM and choose the following options on the CD:
Please follow this order:
1: Install Driver
2: Install BlazePhoto Software
3: Install Directx 9.0
Note: if you are running Windows XP Service Pack 2 or higher or
Windows Vista and XP professional this is not needed.
4: Install Adobe Reader if you do not have this installed on your
computer already
After installation please restart your computer-this is
important!
After restarting, connect the USB cable from the film scanner into
your computer.
Note: if many USB
devices are connec
ted to your computer such
as Mobile Phones, Media players or other USB powered devices
there may be inadequate power for the film scanner. Please
unplug all unneeded USB devices before saving images with the
film scanner.
Upon the first connection of the film scanner the Hardware Wizard
will automatically launch. Choose the selection to search and
automatically install the hardware drivers.
3. Installation
To Next Page
Loading...
Need help?
General
