JBL Balboa SUB10 User Manual

A
ll features and specifications are subject to change without notice.
A
ll dimensions include grilles and feet.
JBL and Harman International are registered trademarks, and Balboa Series and Pro Sound
C
omes Home are trademarks, of Harman International Industries, Incorporated.
D
olby is a registered trademark of Dolby Laboratories.
DTS is a registered trademark of DTS, Inc.
* The Peak Dynamic Power is measured by recording the highest center-to-peak voltage measured
across the output of a resistive load equal to minimum impedance of the transducer,
using a 50Hz
s
ine wave burst, 3 cycles on, 17 cycles off.
© 2006 Harman International Industries, Incorporated. All rights reserved.
Part No.
406-000-05480-E
PRO SOUND COMES HOME
™
Harman Consumer Group, Inc., 250 Crossways Park Drive, Woodbury, NY 11797 USA
8500 Balboa Boulevard,
N
orthridge, CA 9
1
3
29 USA
2, route de Tours, 72500 Château du Loir
, France
www.jbl.com 516.255.4JBL (4525) (USA only)
B
alboa SUB10
F
requency Response:
3
0Hz – 150Hz (–6dB)
Amplifier Output: 100 watts RMS
(20Hz – 150Hz,
with no more than 0.1% THD)
P
eak Dynamic Power*:
2
25 watts
C
rossover Frequency:
5
0Hz – 150Hz,
24dB/octave, continuously variable
Driver: 10" (250mm)
Dimensions (H x W x D): 20-1/4" x 14-1/16" x 15-13/16"
(514mm x 357mm x 402mm)
W
eight:
3
5 lb (16kg)
SPECIFICATIONS
BALBOA Sub10.OM.qxd 8/2/06 3:22 PM Page 1

JBL Balboa SUB10 Specifications

Audio Specifications

frequency response	30Hz – 150Hz
amplifier output	100 watts RMS
peak dynamic power	225 watts
crossover frequency	50Hz – 150Hz
driver size	10" (250mm)

Weight and Dimensions

dimensions	20-1/4" x 14-1/16" x 15-13/16" (514mm x 357mm x 402mm)
weight	35 lb (16kg)