Pg 10 JBL SA550 Classic Owner's Manual EN
Bluetooth Operation
To pair your Bluetooth source device with the SA550, open the Bluetooth settings on your source device
and scan for discoverable products to pair with. Select JBL SA550 #### from the list.
By default, the amplifier can be discovered and paired to when switched on and not connected to another
Bluetooth device – it does not need to be on the BT input. This function can be overridden by changing
the BT Auto SW setting in the menu. To use the menu, see Page 13.
Note: With the BT Auto SW setting changed to Off, the amplifier must be on the
BT input to be discovered by a new device and paired for playing music.
Devices are paired to the amplifier without the sharing of a numerical code.
The amplifier can recall 5 device pairings. If 5 pairings already exist and a new pairing is made, the oldest
pairing will be replaced.
Volume Control
When playing music from Bluetooth, the volume of the amplifier can be controlled from your device.
Because portable devices often have a volume slider, there is a maximum volume setting in the amplifier to
prevent excessive volume output being selected accidentally.
Note: To adjust the maximum volume from Bluetooth, adjust the BT Volume
setting in the menu. The default is 50. To use the menu, see Page 13.
Transport Control
Use the buttons on the remote to control music playback of your device.
To Next Page
Need help?
General
