To Next Page

To Previous Page

Document Number: 950-0158-001 Description: JBL Spot Manual

jbl spot

™

easy setup guide

Step 2. Plug the left and right

satellites into position on the

rear of the subwoofer.

Step 3. Connect the audio input

cable to the rear of the sub-

woofer. Connect the audio cable

to the audio source.

Step 5. Plug the power adapter

into a wall outlet or power strip.

Step 6. Press the Power button

on the back of JBL Spot. A green

LED will light when the JBL Spot

system is on.

Step 8. Adjust bass level by turning

the Bass-Level knob on the rear of

the subwoofer.

Step 4. Connect the power adapter

plug into the position marked on

the rear of the subwoofer.

Step 7. Adjust the volume using

(+) to increase and (–) to decrease.

Press both to mute JBL Spot. Press

either button to unmute.

Step 1. Unpack the JBL Spot sub-

woofer, satellites, power adapter

and input cable. Read these

instructions completely.

Other manuals for JBL Spot

Questions and Answers:

Need help?

Do you have a question about the JBL Spot and is the answer not in the manual?

General

Type	Portable speakers
Power requirements	230 VAC
Number of satellite speakers	2
Satellite speakers RMS power	12 W
Subwoofer dimensions (WxHxD)	200 x 200 x 140 mm
Audio output channels	2.1 channels
Impedance	5000 Ω
Frequency range	40 - 20000 Hz
RMS rated power	36 W
Signal-to-Noise Ratio (SNR)	80 dB