jcb 220LC User Manual

210X 220X 17
A
A
A
B
A
1
4
7
2
5
8
3
6
9
Insert Isolator Key
Engine Pre Heat
Raise LH Isolater lever
Check Isolation Lever
Disarm Immobiliser
Press 2 GO Button
Engage Seat Belt
Start Machine
Operate Machine
Insert isolator key (A) and turn
in a clockwise direction.
Turn ignition to position 1 (A).
Raise the left hand isolator lever
(A) to activate the hydraulics.
If enabled press 2 GO button (A)
to activate hydraulics. Hydraulic
isolation icon (B) will disappear
from the dash when active.
All controls are now active
and the machine is now ready
to use.
Hold down the Start/Stop
button until the machine starts.
Ensure the hydraulic isolation
lever is in the lower position (B).
Engage seat belt (A) into latch
(B) before starting machine.
If fitted disarm by entering PIN
code using the 12 way keypad.
A
Start up sequence
A
B
AUX
A
B
C
E
F
H
G
J
K
L
M
D

jcb 220LC Specifications

General

Brand	jcb
Model	220LC
Category	Excavators
Language	English