About the Product
Product and Component Identification
12 9821/7050-4 12
Figure 5.
A Engine data label - rocker cover
B Engine identification number
C Stamp
The data label includes the engine identification number.
Table 3. Example of the engine identification number
SH 320/40001 U 00001 04
Digit 1-2 3-10 11 12-16 17-18
Table 4.
Digit 1-2 Engine Type
SH 4.4L turbocharged and aftercooled electronic common rail fuel injection (Tier 4i)
DH 4.8L turbocharged and aftercooled electronic common rail fuel injection (Tier 4i)
Table 5. Explanation of the engine identification number
Digit Explanation
3-10 Engine part number
11 Country of manufacture. U = United Kingdom
12-16 Engine serial number
17-18 Year of manufacture
The country of manufacturer, engine serial number and year of manufacture of the engine are also stamped
on the crankcase. Refer to Figure 5.
Operator Protective Structure
ROPS and FOPS Data Plate
Warning! You could be killed or seriously injured if you operate a machine with a damaged or missing
ROPS/FOPS/FOGS. If the ROPS/FOPS/FOGS has been in an accident, do not use the machine until the
structure has been renewed. Modifications and repairs that are not approved by the manufacturer may be
dangerous and will invalidate the ROPS/FOPS/FOGS certification.
Warning! Do not use the machine if the falling objects protection level provided by the structure is not
sufficient for the application. Falling objects can cause serious injury.
Warning! Machines with a ROPS, FOPS,FOGS or TOPS are equipped with a seat belt. The ROPS,
FOPS,FOGS or TOPS is designed to give you protection in an accident. If you do not wear the seat belt you
To Next Page
Loading...
Need help?
General
