Section 1-3 - General Information
Machine Identification
Machine Identification Plate
1-3-3 1-3-3
9803/3750-05 (1-02-01)
Machine Identification Plate
The machine has an identification plate mounted as
shown. K Fig 1. ( T 1-3-3). The serial numbers of the
machine and its major units are stamped on the plate.
Note: The machine model and build specification is
indicated by the PIN.
The serial number of each major unit is also stamped on
the unit itself. If a major unit is replaced by a new one, the
serial number on the identification plate will be wrong.
Either stamp the new number of the unit on the
identification plate, or simply stamp out the old number.
This will prevent the wrong unit number being quoted when
replacement parts are ordered.
The machine and engine serial numbers can help identify
exactly the type of equipment you have.
420811
Fig 1.
Typical Product Identification Number
(PIN)
Machines Built Before January 2010
T011100
1 World Manufacturer Identification (3 Digits)
2 Machine Model (3 Digits)
3 Engine Type (1 Digit)
4 Gearbox Model (1 Digit)
5 Randomly generated check letter (1 Digit)
6 Year of Manufacture (1 Digit)
7 Machine Serial Number (7 Digits)
Each machine has a unique serial number.
Standard Builds:
5AF = 540-170 5AM = 550-170
5AG = 550-140 5AN = 535-125 HiViz
5AL = 540-140 5AP = 535-140 HiViz
5AM = 550-170
JCB Dieselmax (Tier 3):
R = Turbocharged and after-cooled, 97kW (130Hp)
S = Turbocharged and after-cooled, 74.2kW
(100Hp)
T = Turbocharged, 63kW (85Hp)
E = 3 Speed (PS750) G = 4 Speed (PS750)
F = 3 Speed (PS760) H = 4 Speed (PS760)
7 = 2007 A = 2010
8 = 2008 B = 2011
9 = 2009 C = 2012
ProCarManuals.com
To Next Page
Loading...
Need help?
General
