Section 1-1 - General Information
1-1-1 1-1-1
9803/3750-05 (1-14-01)
Applications
Introduction
This manual contains topics that relate to some or all JCB
Loadall machines in the 5A group. There are several machine
model codes in the family.
Machine Group Model Code Model Name
5A F 540-170
5A G 550-140
5A L 540-140
5A M 550-170
5A N 535-125 Hi Viz
5A P 535-140 Hi Viz
Machine variants: There are different machine variants within the same model name. This happens because of market
requirements, or when the machine specification changes after a period of time. Information relating specifically to
different variants of the same model is given in the applications tables and in the Topics throughout the manual where
applicable.
Use the applications tables to see which topics relate to which machine models and variants.
Important: The machine model names are NOT referred to in the topics. You must refer to the applications tables for the
applicable machine models.
K
Tables ( T 1-1-2)
K Section 1 - General Information ( T 1-1-2)
K Section 2 - Care and Safety ( T 1-1-3)
K Section 3 - Routine Maintenance ( T 1-1-4)
K Section B - Body and Framework ( T 1-1-5)
K Section C - Electrics ( T 1-1-6)
K Section E - Hydraulics ( T 1-1-7)
K Section F - Transmission ( T 1-1-8)
K Section G - Brakes ( T 1-1-9)
K Section H - Steering ( T 1-1-10)
K Section K - Engine ( T 1-1-11)
K Section M - Electronic Data Systems ( T 1-1-12)
ProCarManuals.com
To Next Page
Loading...
Need help?
General
