16 Please see operator manual for full details.
Service/Maintenance
Daily Checks (10h) Check
Check condition of attachments / optional equipment Visual Check
Grease attachments / optional equipment as required Lubricate
Clean bodywork and framework Clean
Check condition of bodywork and framework Visual Check
Check condition of cab/canopy including seat belt Visual Check
Check engine for leaks and oil level Visual Check
Check condition of drive belt Visual Check
Check fuel system for leaks & contamination Visual Check
Drain water from water separator on fuel filter Clean
Check engine coolant for leaks, contamination and level Visual Check
Check condition of cooling pack and system Visual Check
Check hydraulic oil level Visual Check
Check window washer fluid level Visual Check
Check the condition of the fire extinguisher Visual Check
Check operation of all services i.e. excavator, dozer etc. Operate
Check operation of all electrical equipment i.e horn, alarms etc. Operate
Check operation of the hour meter Visual Check
Weekly Checks Check
Grease slew ring bearing Lubricate
Clean cooling pack Clean
Check condition and tension of tracks Visual Check
Check hydraulic hoses / pipework for leaks and damage Visual Check
Check condition of the rams Visual Check
Check the condition of the electrical wiring Visual Check
Clean the battery terminals Clean
Check the operation of the battery isolator Operate