06 - Body and Framework
03 - Chassis
37 - Lower Crossmember
06 - 11 9813/5300-1 06 - 11
37 - Lower Crossmember
Remove and Install
CAUTION This component is heavy. It must only
be removed or handled using a suitable lifting
method and device.
Remove
1. Make the machine safe. Refer to (PIL 01-03).
2. Isolate the battery. Refer to (PIL 33-03).
3. Remove the pin from the tow hitch.
4. Remove the screws.
5. Support the lower crossmember with suitable
lifting equipment.
6. Remove the lower crossmember from the
machine.
Figure 8.
A Lower crossmember
B Screws
C Pin
D Tow hitch
Install
1. The installation procedure is the opposite of the
removal procedure.
To Next Page
Loading...
Need help?
General
