06 - Body and Framework
12 - Lift Arm
00 - General
06 - 20 9813/5300-1 06 - 20
Health and Safety
Lifting Equipment
You can be injured if you use incorrect or faulty lifting
equipment. You must identify the weight of the item to
be lifted then choose lifting equipment that is strong
enough and suitable for the job. Make sure that lifting
equipment is in good condition and complies with all
local regulations.
WARNING! Do not work under raised lift arms unless
they are adequately supported by stands and/or
slings.
CAUTION! The lift arm pivot levers are potentially
dangerous, when pivoting about their centre they
form a scissor point with the lift arm. Make sure the
pivot levers are securely blocked when working in the
lift arm area.
CAUTION! This component is heavy. It must only be
removed or handled using a suitable lifting method
and device.
Check (Condition)
1. Make sure that the bushes and the pivot pins
are within the permitted tolerances. Replace the
pivot pin or bushes as necessary.
2. Examine the lift arm structure for wear, damage
or corrosion. Replace as necessary.
3. Examine the pivot levers for wear, damage or
corrosion. Replace as necessary.
To Next Page
Loading...
Need help?
General
