16 Please see operator manual for full details.
Service & Maintenance
Daily Checks (10h) Action
Check condition of attachments / optional equipment Visual check
Grease attachments / optional equipment/ pivot pins as required Lubricate
Clean bodywork and framework Clean
Check condition of bodywork and framework and general machine Visual check
Check engine for leaks and oil level Visual check
Check fuel system for leaks and contamination Visual check
Drain water from water separator on fuel filter Clean
Check engine coolant for leaks, condition and level Visual check
Check and clean radiator Clean
Check hydraulic oil level Visual check
Check operation of all services i.e. excavator, dozer etc. Operate
Check operation of electrical equipment i.e. warning lights, beacon Operate
Check operation of the hourmeter Operate
Check track and running gear operation Operate
Grease pivot pin Lubricate
Weekly Checks (50h) Action
Check and adjust air cleaner hose security Visual check
Check and adjust the fan belt tension/condition Visual check
Grease slew ring bearing Lubricate
Grease undercarriage extension rams and door/window hinges Lubricate
Check electrical wiring for chaffing/routing Visual check
Check track plate condition and bolt torque Visual check
Check track tension Visual check
Check hydraulic hoses / pipework for leaks and damage Operate
Check condition of the rams Visual check
Check operation of electrical equipment i.e. warning lights, beacon Operate
Check and clean the battery terminals Clean
To Next Page
Loading...
Need help?
General
