8008 CTS, 8010 CTS 7
REFER TO OPERATORS MANUAL TRANSPORTING MACHINE
Lifting Points
Fig 3
The correct lifting positions are identified on the machine by their labels: Lifting point
position label.
Carry out the following procedure when lifting a machine:
1. Remove all attachments.
2. Remove all loose equipment from machine exterior.
3. Check the unladen weight of the machine.
4. Attach lifting equipment to each end of the dozer blade.
5. Attach lifting equipment to each side of the boom.
6. Take the weight of the machine.
7. Check that the lifting eye is positioned directly above the machine centre of gravity.
Lifting points have been provided on the
machine as follows:
1. On each end of the dozer blade at point A.
2. On each side of the boom at points B.
To Next Page
Loading...
Need help?
General
