To Next Page

To Previous Page

Operation

Transporting the Machine

148 148

9811/9950-1

Loading a Machine onto the

Transporting Vehicle

1 Position the transporting vehicle on firm level ground.

2 Apply the park brakes and lower any stability jacks.

!MWARNING

Make sure that the ramp incline does not exceed the

machine's operational limits. See 'Working on Slopes'

for further details.

0133

3 Position the loading ramps securely on the

transporter.

4 Align the machine with the loading ramps, position the

dozer blade to the front and fully raised. Slightly

extend the boom and dipper for stability. With the

machine in low speed mode, track forward onto the

ramp slowly and smoothly. Ensure the bucket will not

contact the transporter ramps when loading the

machine.

5 Slowly drive the machine to the top of the ramps.

Lower the boom until the bucket contacts the

transporter deck. Slowly drive forward. As the tracks

begin to clear the ramps, gently raise the boom

allowing the machine to rock forward onto the

transporter bed.

6 Slew the cab around 180°.

7 Machines fitted with mechanical slew lock, engage

the slew lock.

8 Lower the bucket onto the transporter bed.

9 Stop the engine and secure the machine using the

securing points on the vehicle. K

Securing the

Machine ( T 150).

10 Remove and secure both ramps.

HE Services

jcb 8030 ZTS User Manual

Other manuals for jcb 8030 ZTS