jcb Access Series User Manual

ELECTRIC SCISSORS
13
1
3
2
4
Connect Isolator
Switch Key Left
Pull E-Stops
Toggle Switch
The isolator is located within the battery tray
on the left hand side of the machine.
Turn the key switch left to enable
the ground controls.
Ensure both the ground controls and platform
controls E-stops are released.
Use the toggle switch to raise or lower
the platform as required.
Note: If the platform raise/lower fails to operate, ensure the key switch is in the correct position and all of the
emergency stops have been pulled to release.
Operating from the Ground

jcb Access Series Specifications

General

Brand	jcb
Model	Access Series
Category	Scissor Lifts
Language	English