TECHNICAL DATA
Voltage 20V
No load speed 0-400/0-1300/min
Number of clutch positions 20+1+1
Impact rate 0-6400/0-20800/min
Max torque (soft/hard) 35/50N.m
Chuck capacity 13mm
Max. drilling
capacity
Wood 35mm
Steel 13mm
Masonry 16mm
Machine weight 2.1kg
*Voltage measured without workload. Initial battery voltage reaches maximum of 20
volts. Nominal voltage is 18 volts.
NOISE INFORMATION
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Impact drilling into concrete
Vibration emission value a
h
=13.8m/s²
Uncertainty K=1.5m/s²
Drilling into metal
Vibration emission value a
h
=3.7m/s²
Uncertainty K=1.5m/s²
A weighted sound pressure L
pA
: 87dB (A)
A weighted sound power L
wA
: 98dB (A)
K
pA
& K
wA
=3.0dB (A)
Wear ear protection when sound pressure is over: 80dB (A)
WARNING:
The vibration emission value during actual use of the power tool can
differ from the declared value depending on the ways in which the tool is used
dependant on the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
To Next Page
General