EasyManuals Logo
Home>jcb>Engine>JCB-E460P

jcb JCB-E460P User Manual

jcb JCB-E460P
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
JCB-E460P
Instruction & User Manual
11
Pre-Operation Checks
Oil Level
Check Engine Oil Level Check the engine oil level with the engine stopped and in a level position.
> Remove the oil filler cap/dipstick and wipe it clean.
> Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick.
> If the oil level is low, fill to the edge of the oil filler hole with the recommended oil .
> Screw in the oil filler cap/dipstick securely.
Air Filter Inspection
A dirty air filter will restrict air flow to the carburettor, reducing engine
and machine performance.
Remove the Air Filter Cover and inspect the filters. Clean or replace
dirty filter elements. Always replace damaged filter elements.
Reinstall the air filter and air cleaner cover. Be sure all the parts shown
below are in place. Tighten the wing nut securely.
WARNING! Operating the engine without an air filter, or with
a damaged air filter, will allow dirt to enter the engine,
causing rapid engine wear. This type of damage is not covered
by the Distributor’s Limited Warranty.
Oil Filler Cap / Dipstick
Oil Inlet
Maximum Level
Minimum Level
Air Filter Cover
Butterfly Nut
Filter Element
Gasket
Carburettor
body

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the jcb JCB-E460P and is the answer not in the manual?

jcb JCB-E460P Specifications

General IconGeneral
Brandjcb
ModelJCB-E460P
CategoryEngine
LanguageEnglish

Related product manuals