Section 1 - General Information
1-13 1-13
9813/4050-01
General Procedures
Introduction
When work is done on the machine it is important that the correct care is taken. This will help to prevent personal injury
and reduce the risk of component failure.
As part of the procedures in this manual you will need to do some general procedures. Two examples of these general
procedures are; parking the machine and making it safe, and venting hydraulic pressure.
These procedures are given here as an alternative to again and again in the manual. Where applicable you will see a
cross reference to this section so that you can refer to the detailed procedures.
K
Parking the Machine and Making it Safe ( T 1-14)
K Venting the Hydraulic Pressure ( T 1-15)
K Connecting/Disconnecting Hydraulic Hoses ( T 1-16)
K Battery Disconnection/Connection ( T 1-17)
K Removing and Replacing Components ( T 1-18)
K Battery Charging System Precautions ( T 1-19)
K Gas Hydraulic Bladder Accumulators ( T 1-20)
To Next Page
Loading...
Need help?
General
