To Next Page

To Previous Page

Technical Data

Fault-Finding

102 9831/3200-3 102

Display Description Lift Reaction Operator Instructions

87 Up limit switch fault Warning only Contact JCB Dealer

90 Over 90% load warning Warning only Reduce weight from the plat-

form

99 Over 99% load warning Warning only Reduce weight from the plat-

form

OL Overloaded platform fault Disables all motion Reduce weight from the plat-

form, machine will not move till

load reduced.

LL Machine tilted beyond Safe

limits fault

Disables lifting and driving Check the ground level

LF Up/down control fault Warning only Restart the machine

(1) If any of the codes persist, connect the JCB ServiceMaster to fault find. Contact your JCB Dealer if required.

If the machine reports and error on the display while driving with platform raised, lower the platform and move

the machine to a smooth firm level surface. For more information, please contact your local JCB dealer.

In the event of an overload alarm 'OL', remove the excess load from the platform. Machine will not raise or

lower until load is reduced.

Questions and Answers:

Need help?

Do you have a question about the jcb S1930E and is the answer not in the manual?

jcb S1930E Specifications

General