Jeep 2xe ADVENTURER User Manual

14
Priortousingtheitemforthersttime,chargeto100%.Ensuretheitem,charger,and
charging port are dry.
Instructions
Open the kickstand
Switch off the scooter
MODEL REFERENCE PICTURE INSTRUCTIONS
2xe
ADVENTURER
2xe URBAN
CAMOU
- Remove the rubber cover
from the charging socket
- Connect the battery
charger to the charging
port and then to the power
socket.
- When the item is fully
charged, the light on the
charger changes from
red (charging) to green
(charging complete).
- After charging, close
the rubber cover on the
charging socket
- Unplug the battery
charger from the power
socket
CAUTION
To recharge the item, use the battery charger supplied ONLY
MODEL BATTERY CHARGER MODEL OUTPUT VOLTAGE RECHARGE TIME
2xe ADVENTURER
HVE063-4200150 42V – 1.5A 7 h
2xe URBAN CAMOU
HVE126-5460200 54.6V – 2.0A 5 h
Using another type of charger may damage the scooter or entail other potential risks.
Never leave the product unsupervised while it is charging. Do not ride the item while
charging.
After each use, fully recharge the battery to extend its useful life. Do not recharge the item
immediately after use. Allow the scooter to cool for an hour before recharging.
4. Battery charging and activation

Jeep 2xe ADVENTURER Specifications

General

Brand	Jeep
Model	2xe ADVENTURER
Category	Scooter
Language	English