Performance Specifications
Output Power
Continuous RMS watts
@ 8 ohms 150 watts
@ 4 ohms 250 watts
Power Bandwidth 0.5 Hz to 160 kHz, -3 dB
Slew Rate 80 volts per microsecond
THD and Noise Less than 0.05% at rated power
Damping Factor Greater than 100, 20 Hz to 20 kHz, 8 ohms
Output Current 35 amps continuous, 50 amps peak
Overall Gain
& Sensitivity
User selectable on rear panel
(1 watt, 8 ohms) 26 dB or 32 dB; 141 mV or 71 mV
Input Impedance User selectable on rear panel
Unbalanced 18k or 600 ohms
Balanced 18k or 600 ohms
Common Mode
Rejection Ratio
Greater than 60 dB, 20 Hz to 20 kHz
Power Consumption 25 watts standby; 225 watts operating, idle;
400 watts per Amplifier maximum
Inputs
Unbalanced With supplied XLR/RCA adapter
Balanced XLR connector
Outputs 1 pair binding posts
Dimensions 17.5 in. W x 14.25 in. D x 5.25 in. H
44.5 cm W x 36.2 cm D x 13.3 cm H
Shipping Dimensions 24 in. W x 20 in. D x 12 in. H
61 cm W x 50.8 cm D x 30.5 cm H
Weight 45 lbs. (20.5 kg)
Shipping Weight 71 lbs. (32.0 kg)
Because Jeff Rowland Design Group is constantly analyzing new
design improvements, we reserve the right to change or modify product
specifications without notice or obligation.
Operation / Specifications
To Next Page
Loading...
Need help?
General
