UNPACKING AND PLACEMENT
INITIAL INSPECTION
Inspect the shipping container for damage. If any portion of the shipping container, packing
material, integrated amplier, or accessories are damaged or missing, notify your dealer and
the shipper (if a claim is to be made) immediately.
NOTE: MANY SHIPPERS REQUIRE NOTIFICATION AND INSPECTION WITHIN 24 HOURS OF DELIVERY TO
DETERMINE THE NATURE OF DAMAGES INCURRED.
Your CONTINUUM S2 has undergone extensive performance evaluations, listening tests,
quality control inspections, and a minimum 72-hour burn-in period prior to shipment and
should therefore be in perfect operating condition upon delivery. If the integrated amplier
does not operate correctly, please notify your dealer immediately.
We strongly suggest that you save all of the packing materials. If the integrated amplier is
returned to your dealer or Jeff Rowland Design Group, the original packing materials must be
used for shipment to avoid possible damage. Neither Jeff Rowland Design Group nor the
shipper can be held responsible for damages incurred during transit if the original factory
packing is not used. All factory returns require that Jeff Rowland Design Group issue a Return
Authorization (RA) number prior to shipment.
UNPACKING
Carefully unpack integrated amplier chassis from original packing box. Remove all accessory
items from the accessory box. Accessories include:
1 Detachable IEC AC Power Cord
Operational Manual
Warranty Card
IMPORTANT: RETAIN ALL PACKING MATERIALS FOR FUTURE TRANSPORT. SHIPPING PRODUCT IN
INADEQUATE PACKING MATERIALS MAY VIOLATE THE JEFF ROWLAND DESIGN GROUP MANUFACTURER’S
WARRANTY.
REVA1.9 - CONTINUUM S2 INTEGRATED AMPLIFIER
PAGE 9
To Next Page
Need help?
General
