To Next Page

To Previous Page

JHD3630BT

Satellite Signal Strength

The display will indicate satellite reception strength as shown below.

Channel Lock

Access Channel Lock through the System Menu under the “SiriusXM Satellite Radio” menu.

See “System Menu” on page 6.

1. Select “Set Lock Code” and press the INFO/ENTER button (16).

2. Enter the default lock code of “0000”. To set the lock code:

a. Press the TUNE/SEEK |<< / >>| (18, 19) buttons to enter the first digit of the default

code.

b. Press the INFO/ENTER button to move to the next digit.

c. Repeat above steps to enter all 4 digits of the default code.

d. Press the TUNE/SEEK |<< / >>| (18, 19) buttons to enter the first digit of the new

code.

e. Press the INFO/ENTER button to move to the next digit.

f. Repeat above steps to enter all 4 digits.

g. Repeat above steps to confirm the new code.

3. After setting a new four digit code, you can lock channels by entering the “Locked

Channels” menu.

4. Upon entering the Locked Channels list, you will be prompted to enter your four digit

code.

a. Press the TUNE/SEEK |<< / >>| (18, 19) buttons to enter the first digit.

b. Press the INFO/ENTER button to move to the next digit.

c. Repeat above steps to enter all 4 digits.

5. After entering the code, you can navigate the list using the TUNE/SEEK |<< / >>| buttons

to highlight the channels.

6. Press the INFO/ENTER button (16) to Lock (indicated by a icon) or Unlock ( ) the

selected channel.

Signal Strength Strength Display

No Signal

Weak

Good

Excellent

Jensen JHD3630BT User Manual

Other manuals for Jensen JHD3630BT