9
MP3/USB OPERATION
MP3 Specifications
• A directory that does not include an MP3 file is skipped.
• Maximum number of folders: 512 (including skipped directories)
• Maximum number of folder levels: 12
• Maximum number of MP3 files: 999
• Maximum number of characters for MP3 file name and folder name: 32
• Sampling frequency: 16KHz, 22.05KHz, 24KHz, 32KHz, 44.1KHz, 48KHz.
• Bit rates: maximum 384 Kbps.
• Maximum number of Characters of ID3 Tag:
• ID3 Tag version 1.0: 32
• ID3 Tag version 2.x: 32
NOTE: USB flash drives with a capacity of up to 64 GB are supported.
Inserting and Removing a USB Device
Inserting a USB Device
Insert the USB device into the USB connector routed from the rear of the radio
and display will show the “Loading…” message. The unit will read the files on the
USB device automatically.
Removing a USB Device
Press the MODE button (4) to select another mode and then remove the USB
device from the USB connector.
NOTE: After loading a USB device, files and folders are accessed in the
order in which they were written to the device. Therefore, the playing order
may not be the same as the order in which they are expected to be played.
Controlling Playback
Pause/Play
Press the 1/|| button (5) to suspend playback. Press the 1/|| button again to
resume playback.
Track Select
Press the ►►| SEEK/TUNE/TRK or |◄◄ SEEK/TUNE/TRK buttons (14, 13)
button for less than one second to advance to the next file, or press and hold to
fast forward or fast reverse. Playback begins when the button is released.
Repeat (RPT)
Press the 2/RPT button (6) to repeatedly play the current file. Press 2/RPT again
to repeat all songs in the current folder. Press 2/RPT a third time to resume
normal playback.
Intro Scan (INT)
Press the 3/INT button (7) once to play the first 10 seconds of each file in the
current folder.
Press 3/INT again to play the first 10 seconds of each file on the current device.
When the desired file is reached, press 3/INT a third time to end the scan and play
the selected file.
Random (RDM)
Press the 4/RDM button (8) to randomly play all files in the current folder. Press
4/RDM again to randomly play all files on the device. Press 4/RDM a third time to
resume normal playback.
Navigating Folders
Press the 5 button (9) to move to the previous folder and begin playback of the
first song in the folder. Press the 6 button (10) to advance to the next folder and
begin playback of the first song in the folder.
Alternate Display Information
Press the DISP button (12) to change the display information in the following order:
ALBUM >SONG TITLE > ARTIST > FILE X of Y > ALBUM.
MP3/WMA Directory Search
1. Press the BAND/SEARCH button (16) to enter directory search mode.
2. Press the ENTER button (18) to confirm search mode. The LCD will display
the folder list.
3. Navigate the folder list by pressing the VOL+ UP or DOWN VOL- buttons (2).
4. Press the ENTER button to select a folder. The LCD will display the list of
files within that folder.
5. Navigate the file list by pressing the VOL+ UP or DOWN VOL- buttons.
6. Press the ENTER button to select a file.
To Next Page
Loading...
Need help?
General
