Jetson GEN 1 User Manual

11
PEDALS
There are two Pedals that can be used to ride the Gen 1 instead of using the
Motor.
If you do not want to use the Pedals, they can be lifted up. To lift the Pedals up,
press the button on the Pedal in. Then push the Pedal in towards the center of
the Gen 1 and lift it up. To unfold, push the Pedal down.
KICKSTAND
To put the Kickstand down, lift the Gen 1 by the Rear Handle and push the
Kickstand down and forward toward the Front Wheel.
Press
Button
Push In and Up

Jetson GEN 1 Specifications

General

Brand	Jetson
Model	GEN 1
Category	Scooter
Language	English