Jetson GEN 1 User Manual

6
UNBOXING
After removing the cardboard carton, you will have to remove the metal crate
from around the Gen 1. Using the provided tools, unbolt each metal bar from
the top of the crate then unbolt the metal clasps hooked onto the Handlebars
of the Gen 1. Be careful not to scratch the frame of the Gen 1. Please check the
cardboard carton and metal crate for loose parts before discarding.
The Gen 1 comes fully assembled, except for the side mirrors.
To assemble the Side Mirrors, place the stem of the Side Mirrors into the holes
of the Handlebars and turn until secure using the included tools.
Gen 1 with mirrors

Jetson GEN 1 Specifications

General

Brand	Jetson
Model	GEN 1
Category	Scooter
Language	English