Jetson Z12 User Manual

3. CHARGING THE BATTERY
Charging Port
A few must-do’s:
• Only use the included charger
• Plug the charger into the wall before the Charging Port
• Don’t turn on the Bolt while it’s charging (it needs its rest)
• Charge the battery until it is fully charged - up to 3 hours
• Replace the cover over the Charging Port when done
• Remember to have fun!
CHARGING INDICATOR ON THE CHARGER:
Red Light: Battery is charging
Green Light: Charging is complete

Jetson Z12 Specifications

General

Brand	Jetson
Model	Z12
Category	hoverboards
Language	English