6. HOW TO RECALIBRATE
If you are having issues with the Z12 Galaxy, you may need to
recalibrate it. Follow these steps...
1. Place the Z12 Galaxy on a flat, level surface. Now say something
nice to it. Just kidding, but, go ahead if you like.
2. Hold the Power Button (for about 5 seconds) until you are notified
of a successful recalibration.
3. Restart the Z12 Galaxy by turning it off and then on.
4. You’re all set! The Z12 Galaxy is ready to roll.
Hold for
5 seconds
To Next Page
Loading...
Need help?
General
