The purpose of scheduled maintenance is to perform regular maintenance operations as required, in
order to prevent possible failures from occurring and ensure good performance throughout the life
of the 3D printer.
• Take appropriate measures to minimize the risks to yourself and to others before printing.
• Prior to printing, always make sure that:
1.Movement of every axis is smooth and without binding.
2.Nozzle is not clogged or damaged.
3.Every screw is tight and all connections are secured in position.
4.Bed is level.
5.There is no condensation inside the printer.
6.Printer is properly grounded and installed to satisfy electrical classification requirements.
7.Printer is operating within the specified ranges of operating temperature and humidity.
Maintenance
28
To Next Page
Loading...
Need help?
General
